Handpoke Online Course

2. EQUIPMENT

2.5 Stencils

I am sorry you will now have to enter your password for every video.

Sadly I had some security issues.

14 thoughts on “HOC – 2.5 Stencils”

  1. Hi Ann !
    Is it possible to create our own stencil juice ?
    I heard rumors about aloe Vera + alcohol ….
    Thanks for your vidΓ©os πŸ˜€

    1. HEy πŸ™‚ To be honest I never heared of that <3 So I don't know. But so far I have good evpereience sith stencil jizz πŸ˜‰

  2. Hey Ann!
    I’m not sure if you go over this later, but do you clean the tattoo area again after applying the stencil? If so, how long do you wait to wipe it down? So far I’ve cleaned it after applying the stencil as well and I find my stencil comes off quite a bit.
    Thanks so much!

    1. Hey Elly πŸ™‚
      No I don’t clean the area after applying the stencil.. and no one does πŸ˜‰ You just cleaned and desinfected it before applying the stencil and that is enough. ; )
      And as you said, you would waste your stencil by doing so : )

  3. Hi Ann,

    ist das ein Rasierer, den man sterilisieren kann oder sollte man immer Einmalrasierer nutzen? πŸ™‚

    Danke & Liebe Grüße
    Lea

    1. Hey Lea πŸ™‚
      Yes it is stainless steel so you can desinfect and sterilize it πŸ˜‰
      Also I use a new blade for every customer.

  4. Hi Ann! im new to handpoking and I have a question! as my tattoo designs are mostly colored inks (red, yellow, green blue, etc.) However, I’m struggling a lot with the stencils as my stencil printer (its the no-brand that u mention in the video) just can’t seem to print out bright colours design (esp yellow) example: a sunflower with yellow outline, leaves in green outline and when I try to print from the stencil printer, nothing comes out. And i have tried adjusting the setting to Deepness II but it still doesn’t work. Could u be able to help me out? thank u !!:-)

    1. Hey Bernice,
      I am so sorry for the late reply. The file you print needs to be all black to get a proper stencil πŸ˜‰
      Ann <3

  5. Hey Ann,
    is there any specific sort of pen you should use for marking the tattoo placement?
    Thanks a lot and have a nice day!
    Julia

    1. Hey Julia πŸ™‚
      I am really sorry for the late reply.
      You can buy special pens, that are specially made for this purpose from any tattoo supplier <3

  6. Hi Ann,

    are you sure the cheap stencil printer costs 30 Euro?
    I only find the exact one for 130 euro, but the stencil paper may cost 30 euro. If you know the link, could you post it?
    Maybe I overlooked something.. πŸ™‚
    Thank you!!

    1. Hey Jola,
      Sorry for the late reply. I bought it for this price but I can’t find it anymore for this cheap either. It was a few years ago so maybe the resellers figured out by now that they can take more money for it because it was really cheap.
      Really sorry I gave you a wrong impression here. But for a stencil printer it is still pretty cheap πŸ˜‰
      Ann <3

  7. Hi Ann,
    thank u for the great course, it helped me clear many things in the procedure and I am super grateful u put so much effort in it!
    I was hoping u could help me out with my problems regarding stencil application and removing of the stencil. I am using the stencil printer and green stuff to put the stencil on.
    When I fck it up applying first time, it’s really hard to get rid of the stencil from the skin again. Also when the tattoo is done, i’d love to be able to remove the rest of the stencil, which could be also annoying when I don’t see where I’ve tattooed or where I could go over again..
    It’s almost impossible to wash it off, even with green soap (I’ve mixed a little bit of green soap with sterile water- but it doesn’t do the job of getting the stencil off)
    what am I doing wrong?
    Would be so glad to get ur help. this really makes me feel like a total noob and raises anxiety…

    thank u xx
    Jola

    1. Hey Jola,
      Sorry for the late reply.
      I mostly use desinfectant to rub it off but you do have to force it a little bit sometimes. It is normal, that sometimes it won’t come off completely. It this case I just tell my clients, that it will come of during the next days and that they don’t have to worry about it.
      The stencil will disappear on its own at some point πŸ˜‰
      Ann <3

Leave a Reply

Your email address will not be published. Required fields are marked *

14 thoughts on “HOC – 2.5 Stencils”

  1. Hi Ann !
    Is it possible to create our own stencil juice ?
    I heard rumors about aloe Vera + alcohol ….
    Thanks for your vidΓ©os πŸ˜€

    1. HEy πŸ™‚ To be honest I never heared of that <3 So I don't know. But so far I have good evpereience sith stencil jizz πŸ˜‰

  2. Hey Ann!
    I’m not sure if you go over this later, but do you clean the tattoo area again after applying the stencil? If so, how long do you wait to wipe it down? So far I’ve cleaned it after applying the stencil as well and I find my stencil comes off quite a bit.
    Thanks so much!

    1. Hey Elly πŸ™‚
      No I don’t clean the area after applying the stencil.. and no one does πŸ˜‰ You just cleaned and desinfected it before applying the stencil and that is enough. ; )
      And as you said, you would waste your stencil by doing so : )

  3. Hi Ann,

    ist das ein Rasierer, den man sterilisieren kann oder sollte man immer Einmalrasierer nutzen? πŸ™‚

    Danke & Liebe Grüße
    Lea

    1. Hey Lea πŸ™‚
      Yes it is stainless steel so you can desinfect and sterilize it πŸ˜‰
      Also I use a new blade for every customer.

  4. Hi Ann! im new to handpoking and I have a question! as my tattoo designs are mostly colored inks (red, yellow, green blue, etc.) However, I’m struggling a lot with the stencils as my stencil printer (its the no-brand that u mention in the video) just can’t seem to print out bright colours design (esp yellow) example: a sunflower with yellow outline, leaves in green outline and when I try to print from the stencil printer, nothing comes out. And i have tried adjusting the setting to Deepness II but it still doesn’t work. Could u be able to help me out? thank u !!:-)

    1. Hey Bernice,
      I am so sorry for the late reply. The file you print needs to be all black to get a proper stencil πŸ˜‰
      Ann <3

  5. Hey Ann,
    is there any specific sort of pen you should use for marking the tattoo placement?
    Thanks a lot and have a nice day!
    Julia

    1. Hey Julia πŸ™‚
      I am really sorry for the late reply.
      You can buy special pens, that are specially made for this purpose from any tattoo supplier <3

  6. Hi Ann,

    are you sure the cheap stencil printer costs 30 Euro?
    I only find the exact one for 130 euro, but the stencil paper may cost 30 euro. If you know the link, could you post it?
    Maybe I overlooked something.. πŸ™‚
    Thank you!!

    1. Hey Jola,
      Sorry for the late reply. I bought it for this price but I can’t find it anymore for this cheap either. It was a few years ago so maybe the resellers figured out by now that they can take more money for it because it was really cheap.
      Really sorry I gave you a wrong impression here. But for a stencil printer it is still pretty cheap πŸ˜‰
      Ann <3

  7. Hi Ann,
    thank u for the great course, it helped me clear many things in the procedure and I am super grateful u put so much effort in it!
    I was hoping u could help me out with my problems regarding stencil application and removing of the stencil. I am using the stencil printer and green stuff to put the stencil on.
    When I fck it up applying first time, it’s really hard to get rid of the stencil from the skin again. Also when the tattoo is done, i’d love to be able to remove the rest of the stencil, which could be also annoying when I don’t see where I’ve tattooed or where I could go over again..
    It’s almost impossible to wash it off, even with green soap (I’ve mixed a little bit of green soap with sterile water- but it doesn’t do the job of getting the stencil off)
    what am I doing wrong?
    Would be so glad to get ur help. this really makes me feel like a total noob and raises anxiety…

    thank u xx
    Jola

    1. Hey Jola,
      Sorry for the late reply.
      I mostly use desinfectant to rub it off but you do have to force it a little bit sometimes. It is normal, that sometimes it won’t come off completely. It this case I just tell my clients, that it will come of during the next days and that they don’t have to worry about it.
      The stencil will disappear on its own at some point πŸ˜‰
      Ann <3

Leave a Reply

Your email address will not be published. Required fields are marked *